Generation Electricity

Version 5.0
Sunday, June 25th
1 pm

Generating electricity.

#stevenpaulcote #elonmusk

Generation Stations utilize clean energy for recharging batteries. Electric generating plan is highly portable deployable 24/7/365 anywhere in the world. Small compact lightweight components make transportation on aircraft and vehicles including helicopters possible.

Electric generating solutions for vehicles deployment is planned land and water including in the air with electric aircraft and helicopters including unmanned drones.

Sustainable transportation and other useful products and systems are planned to be supported with innovation and commercially available products and systems.

Proportionality, it is plan to provide electric generation to support participants electricity needs and requirements proportional and scalable for participants.

Artificial intelligence (AI) is planned including special modeling for optimizing all aspects of generating electricity.

Energy storage systems to be utilized for capturing all electricity and physically deployment.

evStation’s and many other locations including participants properties can have Energy Stations. Complete portable including potentially anonymously.

Human and humanoids (robots) are planned for the electricity generation.

Harvest energy and recharge batteries at an individual location.

Solar system plan: dual-axis tracking device (Custom assemblies) for each independent solar panel. Panels follow the Sun for maximizing solar energy harvesting.

Solar panel system planning different bases for different deployments. Planning fixed weighted bases, motorized bases and potentially others.

Motorized mover’s planned, with additional accessories including batteries. The size and weight dependent upon the darling and deployment purposes.

Remote-Controlled Dolly – Wireless Remote – are planned enabling electricity for assets operability anywhere, anytime for long-periods of time, independent from electric utility grid.

Track dollies can support thousands of pounds. Planning deployment on electric vehicles, in pickup beds with ramp capabilities for one human deployment and Humanoid (Robot’s). The track dollies can move on difficult surfaces: sand, mud and other. Dollies with attachments, including utility trailers for both on-road and off-road situations are planned.

The track dollies planned to be pre-equiped with many different equipment: solar panels, antenna’s, video camera (ultra-high resolution) lighting, unlimited configurations. Rapidly, configurations pre-deployment and post-deployment in the field.

Track dollies have towing capacities, thousands of pounds movement is capable.

No civil engineering plan for generating electricity

Weighted bases surface deployment potentially with tethering cables with additional weight bases for stability. Using weighted basis at angle or shakes It to the ground depending on location.

Weighted and motorized bases planned to be used for holding and deploying electric vehicle charging cables.

The Solar panel systems planning for powering participants electric vehicle (on & off road, including water), communication systems and other assets

Trailer ball with coupler (quick pinning system) for rapid deployment. Fast swap of equipment, systems and other. Remote autonomous planned.

Interconnected for panel system potentially with electric cables with quick disconnect for outdoor use planned in addition to Independent solar system.

Cables used as necessary for increased stability.

Scalable renewable clean energy.

Temporary and semi-permanent design. Potentially near the bases or on the bases waited or motorized storage plans

What3words deal location application is planned to be used working with advanced global satellite satellite communication system, the exact location can be determined providing longitude and latitude plus unique three words approximating a 10 ft by 10 ft square of the exact location.

Biomass Waste Turned In To Energy.

Main parts of the plant are

1. conveyor 2. Stoker 3. Pulverizer 4. Boiler 5. ash 6. Air preheater 7. Electrostatic precipitator 8. Smoke stack 9. Turbine 10. Condenser 11. Transformers 12. Cooling towers
2. Generator 14. High – votge power lines

Basic Operation :A thermal power plant basically works on Rankine cycle.
Coal conveyor : This is a belt type of arrangement.With this coal is transported from coal storage place in power plant to the place near by boiler.
Stoker : The coal which is brought near by boiler has to put in boiler furnance for combustion.This stoker is a mechanical device for feeding coal to a furnace.

Pulverizer : The coal is put in the boiler after pulverization.For this pulverizer is used.A pulverizer is a device for grinding coal for combustion in a furnace in a power plant.

Thermo

Augmenting solar panel electricity generation thermo micro turbines are planned. The thermo systems augment the solar panel system for generation when the sun’s not available or weather conditions or deployment location does not support solar energy production continually or at all.

The combination of solar and Thermo electricity generation insurance adequate amount of electricity to support electric vehicles and other Electric equipment and systems not dependent upon location or grid.

Systems generating electricity quietly without carbon fuels, can be installed above ground anywhere,anytime including at the residence of participants. Temporary, semi-permanent and permanent electricity generation is planned.

Utility power plant boilers are vessels that are reinforced with thick steel and are closed off from the surrounding atmosphere so as to facilitate the building up of highly pressurized steam. This steam is laden with sensible heat energy, meaning it’s a useful energy, and it’s used to run steam turbines, which in turn drive electrical generators. The end result is power to consumers.

Planning to assemble components to replicate traditional utility power plants

How does a pellet stove work? A wood pellet stove burns compressed wood pellets which are fed from the pellet hopper into the combustion pot by an auger.

The fire is fed fresh air rich in oxygen by a combustion fan. Heat is transferred through a heat exchanger before combustion gases are vented. The transferred heat heats air being pulled into the stove and blown into the room by the distribution fan. Ashes fall into the ash pan which can be emptied when full.

That’s the quick answer of how a wood pellet stove works

Planning to follow the wood (grass) pellet stove technology with using proven purchasable components, plus add-on components for the generation of electricity. Potentially including hot-air flue gas stream for spinning/turning blades connected to a shaft, then turning alternator/generator producing electricity.

Pellet fired generation of electricity. Put me on utilizing commercially available pellet fired products for generating heat and hot flu gases. The several electricity generation system consists of off the show components manufactured by others integrated for portable generation of electricity or recharging portable energy storage and potentially directly to electric vehicles

Wood and grass pellets wind burned create significant amount of British several units (BTUs). Fire Chambers of wood pellet or grass pellet products offer many advantages and benefits.

Wood pellets derived from standing dead trees and from the surfaces of forest is planned. The wood pellet playing part of the forest management plan to reduce or prevent forest fires.

While the densities for hardwood and softwood pellets are the same, the key difference between the two is the British thermal unit (BTU) measurement. Softwood has a higher BTU output, meaning it burns hotter than hardwood pellets due to the higher concentration of lignins.

Grass pellets harvested from energy grasses like switchgrasses provide dual benefits when the grass is growing the photosynthesis absorbs carbon with grasses harvested potentially creates grass pellets for burning and thermal units generating electricity.

Potentially a blend of wood and grass pellet mixture may be the most possible Craig the most electricity generation.

Wood pellets are planned to be used for outdoor heating and indoor heating (shelters with venting to the exterior)and cooking on electric grills with wood pellet systems for ongoing heat for cooking.

Grass pellets are a renewable resource grass can be planted within years harvestable product for the about next 15 years can be pelletized and used for electricity generation. Switchgrass and other energy grasses do not require Prime food producing acreage. Advanced harvesting equipment electrically operated is planned.

Independent farmers and other small businesses can potentially produce Clean Energy fuels pelletized with payment by the ton. Potentially including advanced arrangements for equipment and stable payment (monthly) for clean energy renewable fuels.

Possibly the flue gas stream especially in a vertical position can spin turbine blades connected to alternators producing electricity.

High output alternators (Generators) especially for the automobile industry our commercially available in high quantities. Mini original equipment manufacturers (OEM) with scalability (thousands of units potentially available) offer electricity generating products with rotational devices. Reportedly the requirement is about over many revolutions per minute (RPM).

The 12-volt 420 amp model is commonly used in the aftermarket on fire and rescue trucks due to its desirable compact design and high-output performance at engine idle.

Typically, alternators have their full output rated at 6000 RPM

“revolutions per minute” (RPM) and represent the number of times an engine’s crankshaft makes a full rotation every 60 seconds,

The system plan is very similar to traditional power plant construction and design thermal fire box generated heat by fuel source steam pipes superheated the superheated air spins a turbine which spins the generator set generating electricity.

Micro turbines are planned to be custom designed and assembled.llikely to be using 3D printed turbine blades optimized design and offering scalability.

No direct manufacturing is planned some assembly potentially required or outsourced.

The micro turbine system potentially mounted on motorized track system for increased mobility.

Wood pellet made from unusable wood or otherwise produce with electric powered wood pelletizers.

Reportedly there’s over a million dead standing trees in the United States. Sending that trees is problematic related to forest fires provides additional dry fuel for fires.

Millions of acres of energy grass are currently planted and growing. The primary purpose of the grass is for erosion control and other purposes. Switchgrass another energy grass gross for approximately 15 years once planted. The root system is significant reportedly 6 to 7 ft as tall as the above surface visible grass.

Wood and grass sometimes benefit going through Electric or pellet heated pellet dryers. Production of moisture count provides beneficial British terminal units (BTUs)

Generated electricity or fuel source pellets can be transported easily. Upon harvesting and pelletizing it’s planned be transported by electric vehicles.

Thermal electricity production systems offer additional benefit with indoor and outdoor heating for individuals.

Planning hybrid plan with solar and thermo generation of clean substantable electricity. Generation of electricity 24 hours a day, non sunshine dependent, including at nightime and non-sunshine moments.

Fire-boxes from others for heat and micro-turbines assemblies for generating electricity. Complete portable with temporary, semi-permanent operations. The electricity generated planning for recharging energy storage units. Highly efficient portable closed loop system.

The priority of electric generation is proportional to the needs and requirements of participants and operating needs.

Limitations & Disclosures:

Military and law enforcement
No plans at this time for supporting military or law enforcement with generating electricity. Independent individuals can participate and receive the benefits of electric generation.

Disclaimer
Information is highly speculative equipment, vendors and potential providers may or may not participate in the future to implement.

Forward-looking statements
The information presented contains significant amount of forward looking statements that may be realized in the future or not.

Open source
Information provided is open source and should be used by anyone at any time for any useful purpose.

Alternator
Heater (Pellets)
Grill (Pellets)
Components (Pellets)

Background

Tesla CEO Elon Musk outlines radical energy idea: ‘extremely profound’. Unlike a traditional grid with big power stations feeding power to hundreds of homes, the panels would harvest energy and recharge batteries at an individual home. That energy could then be fed back into the grid and distributed to other homes, creating what are effectively miniature power stations.

“I’m not sure how many people will actually understand this, but this is extremely profound,” Musk said. “And necessary, because we are headed towards a world where […] people are moving towards electric vehicles.”

As Elon Musk is standing trial in Delaware over Tesla’s acquisition of SolarCity, the automaker’s energy is quietly introducing a new solar module for its solar rooftop business.

While the solar roof tiles capture most of the attention, Tesla’s solar panels still represent most of its solar business.

Tesla has been revamping its solar panel operations over the last few years, and it recently started to pay off as the division returned to growth over the last few quarters.

Around this time last year, Tesla released a new solar panel and slashed solar retrofit prices.

With the new pricing and a new price match policy, Tesla Solar became extremely competitive, and the company ramped up installations to 92 MW deployed last quarter.

Now, Tesla is again launching a new solar panel: the Tesla T420S photovoltaic module.

The automaker hasn’t updated its online solar panel configurator yet. It still only features the company’s 340-watt solar panel manufacturer by Hanwha Solar.

However, Electrek has confirmed with third-party Tesla solar installers that they started offering the new 420-watt panel, which is much more powerful than what it was previously offering and amongst the most powerful residential solar panels on the market.

Here’s the new Tesla solar panel:

There are three main sizes of solar panels to know: 60-cell, 72-cell, and 96-cell. For commercial and residential solar panels, the 60-cell and 72-cell solar panels size are most commonly used as the 96-cell measures 17.5 square feet

Monocrystalline panels have the highest efficiency rating of any type of solar panel, reaching over 20%. This means that these can convert 20% of sunlight into usable energy. Polycrystalline panels are within the average range, hitting around 15% – 17%

What is dual axis solar tracking?
The dual-axis tracking device tracks the sun to collect more solar energy. According to the type of axis, the dual-axis tracking device can be divided into two types: polar-axis tracking and altitude–azimuth tracking. Polar-axis tracking is also called spinning-elevation tracking

Electric actuators are divided into two different types; rotary and linear.

Most powerful solar panels — Clean Energy

In the solar world, panel efficiency has traditionally been the factor most manufacturers strived to lead. However, a new battle emerged to develop the world’s most powerful solar panel, with many of the industry’s biggest players announcing larger format next-generation panels with power ratings well above 600W.

The race for the most powerful panel began in 2020 when Trina Solar revealed the first panel rated at 600W. Not long after, at the SNEC PV Power Expo in China, JinkoSolar unveiled a 610W version of the Tiger Pro panel. Around the same time, Trina Solar announced that a more powerful 660W+ panel was in development. Amazingly, close to 20 manufacturers at SNEC 2020 showcased panels rated over 600W, with the most powerful being the Jumbo 800W module from JA solar. However, this panel was enormous at 2.2m high and 1.75m wide and will most likely not become commercially available.

Despite the publicity around the many high-powered panels, many PV cell technologies enabling these higher power ratings are universal. Traditional commercial and residential panels have also increased in size and power, with 400W to 500W panels now standard. The considerable increase in power is primarily due to increases in efficiency thanks to many innovations

Trailer balls are designed for strength, ease of use and, ultimately, to get you to your destination without hassle. trailer hitch balls are constructed from quality steel and are made with precision to fit your 2 in trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers such as utility trailers, boat trailers, campers, livestock trailers and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft and more. These tow balls are an excellent extension of your Class 3 or Class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. This particular 2 in trailer ball offers a ball capacity of 6000 lb. It features a 1 in shank Dia, a 2-1/8 in shank length, 0 in of rise and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2 in trailer ball also offers an added measure of holding strength and provides smooth installation and touring

Pelletizer

Pelletizer – A mechanical pelletizing machine is used for converting feed ingredients that are in mash form into dry pellets, resulting in strong, smooth pellets that are good for feeding fish. A pellet mill, also known as a pellet press, is a type of mill or machine press used to create pellets from powdered material

Delco Remy Releases Its Most Powerful, Efficient Alternator

The 12-volt 420 amp model is commonly used in the aftermarket on fire and rescue trucks due to its desirable compact design and high-output performance at engine idle. The 55SI is available today on new fire truck orders at all original equipment manufacturers (OEMs)

Low decibel system.

Decibel is a logarithmic scale describing the degree of loudness for a sound. Planning ultra quiet electricity generation.

Every day we hear a myriad of sounds. From the soft rustling of the newspaper changing from page to page to the siren of a firetruck as it passes through the intersection. How is the intensity of each sound we hear measured? The answer, the decibel. A decibel is a logarithmic scale describing the degree of loudness for a sound.

Sound is energy that travels in waves. There are two ways these waves can be measured: frequency and amplitude.

Frequency, registered in Hertz (Hz), measures the number of times per second that a sound pressure wave repeated itself. Higher frequency sounds create more oscillations or waves per second than lower frequency sounds. Many adults develop “high-frequency hearing loss,” making it more challenging to hear higher-pitched sounds such as a child’s voice.

Amplitude, reported on the decibel (dB) scale, measures forcefulness pressure within a given sound. The higher the amplitude, the louder that sound is. We generally think of this as the volume of a sound.

Exponential Increase
Decibels are measured logarithmically. This is a way of measuring something that is rapidly or exponentially increasing. For example, for every 10dB increase on the dB scale, it equals a ten times increase in sound pressure level (SPL). Near silent is defined as 0 dB but a sound gauged at 10 dB is ten times louder. If a sound is 20 dB, that pushes it 100 times louder than near silent.

Common sounds decibel levels
Unless you are a hearing professional, being told that a particular sound is at a specific decibel level won’t hold much weight. So, we put together a chart to better understand how everyday sounds measure on the decibel scale.

You can see, firearms are substantially louder than city traffic, and an increase of 65 dB is exponentially much louder. This is a significant reason that guns are considered harmful to your hearing. Hearing protection should be used at all times when handling them, so you do not develop shooter’s ear.*Note – Sound ratios are not to scale.

Sign Base Weight – RubberForm Recycled ProductsRubberForm’s Sign Base Weight attaches to our Sign Base, providing a total of 150 pounds for extra security in high-wind areas and larger signs. Like our Sign Base, our Sign Base Weight is made in the USA from 100% post-consumer recycled rubber and plastic.

Combined with our Sign Base and recycled aluminum traffic signs, they make an excellent choice for eco-friendly companies.

Use our sign base weight with our sign base parking lots, grocery stores, restaurants, plazas, construction sites, municipalities and more! It is the only solution for anywhere extra weight is needed for portable or semi-permanent signage.

MODELS

RF-SBWT

Sign Base Weight

HARDWARE KITS

RF-SBWTHWK

4 – 6” RSS Rugged Structural Screws

4 – 3/8” x 1-1/12” Fender Washers

RF-SBMC-LG

Aluminum hand truck with custom lift plate for 150 lbs sign base system

KEY FEATURES

Sign Base Weight Key Features

Aerodynamic design – low center of gravity

For high-wind areas & larger traffic signs

Base weight 75 lbs – 150 lbs total with sign base attached

Made in the USA with 100% American recycled rubber
Impact and weather resistant – will not warp, chip, crack, crumble or corrode

Grass

Elephant grass, also called giant king grass or Napier grass, is a fast-growing energy crops that grows over 4 meters tall and can be harvested in only 195 days. It can be grown in tropical and subtropical areas under different conditions. It is used to produce elephant grass pellets, which is used globally due to its numerous benefits and uses.

Pellet Heater

90000 BTU Stainless Steel Outdoor Patio Heater, 12 Ft Heating Radius, Wood Pellet Fired (Big Timber | Revere Edition)): Patio Heaters –